Switch (config-if)# switchport general allowed vlan 40 untagged. Switch (config-if)# switchport pvid 40. Switch (config-if)# exit. In summary, to set a port as an access port for a certain VLAN, take VLAN 100 as an example, the common configuration is: switchport general allowed vlan 100 untagged. switchport pvid 100. Configure the plug/switch via Kasa app and connect it to the Wi-Fi network of Deco; Launch Deco app, tap the Add icon at the upper right corner, then choose Smart Devices -> Switchs/Plugs/Outlets -> Smart Plug/Smart Light Switch (TP-Link). Tap NEXT, the app will say Searching…. Wait up to 30 seconds until the device is discovered. Verify the configuration. You can use the display smart-link group command to display the smart link group configuration on a switch. # Display the smart link group configuration on Switch C. display smart-link group 1. Smart link group 1 information: Device ID: 000f-e23d-5af0. Once in the admin panel, choose an SSID that is easily differentiated from other nearby networks. It's also smart to steer clear of network names that may not be supported or recognized by smart Kasa Wi-Fi Smart Plug Mini Installation OR scan QR code 1 Download Kasa for Mobile from the App Store or Google Play. 2 Connect your mobile device to a 2.4GHz Wi-Fi network. 3 Launch Kasa and follow the in-app instructions to connect the Kasa Wi-Fi Smart Plug Mini to your network. Note: The Kasa Wi-Fi Smart Plug Mini only supports 2.4GHz networks. Turn off the Wi-Fi on your computer and connect the devices as shown below. Ethernet cable • Method 2: Wirelessly 1 ) Find the SSID (Network Name) and Wireless Password/PIN printed on the label at the bottom of the router. 2 ) Click the network icon of your computer or go to Wi-Fi Setting of your smart TP-LINK_Extender_XXXXXX √ • For Mac OS X Users 1 ) Unplug the Ethernet cable from your computer (if any). 2 ) Click the Wi-Fi icon in the top right corner of the screen, and connect to the extender’s network: TP-LINK_Extender_XXXXXX or TP-LINK_WA850RE. Wi-Fi: On Turn Wi-Fi Off TP-LINK_Router Join Other Network Create Network Step 2. Configure the operation mode to AP Client Router and connect to the wireless network. 1. Click on Operation mode on the left, select AP Client Router, then click on Save. 2. Click on Wireless -> Wireless Mode on the left side, select Client. (In that page, only Client mode is available) 3. Click on Survey/Search button to view the The powerline extender’s wireless network name (SSID) and password, and security option are preset in the factory. The preset SSID and password can be found on the product label and Wi-Fi Info Card. You can customize the wireless settings according to your needs. Here takes TL-WPA9610 as demonstration: 1. Go to Main Menu > Settings > Wi-Fi . 2. On the Wi-Fi Configuration screen, select Network and highlight the option that says "Use iPhone, iPad, or iPod" before tapping Next. 3. Your thermostat should show a screen detailing the setup instructions. While on this screen, go to your iOS device and open Settings > Wi-Fi. 4. PYbgkU.